Public Health Solutions.
image Contract Health Solutions

Light Cure Fissure Sealer
& Bonding Agent

Sealant System

TO ORDER:

Phone: 800-523-0191    Fax: 215-677-7736
Email: customerservice@plaksmacker.com

SealAmerica Pit & Fissure Dental Sealant Kits

Self Cure KitLight Cure Fissure Sealer and Bonding Agent - INSTRUCTIONS

 

Each SealAmerica Kit will seal a minimum

of 100 teeth.

 

Contents: (Seal America Kit)

    • 5 - 1.2mL syringes of sealant
    • 2 - 3mL 38% Phosphoric Acid Etch Syringes
    • 50 blue syringe tips and 50 black with brush
      syringe tips

 

Outstanding Characteristics of the Material

    • Hydrophobicity - Low water absorption assures resistance to staining and durability in the oral environment.
    • Ease in application - Simple dispensing system makes the application easy and economical.
    • Does not require refrigeration.

 

General Information

The light curing technique has made the application of sealers easier and more time efficient. Our Seal America Light Cure Fissure Sealer represents an advanced formula that features low shrinkage, high stain resistance, low water absorption, outstanding depth of cure and a long shelf life with no need for refrigeration.

 

Instructions for Use

After selecting the teeth, clean the enamel.
PLEASE NOTE: Do not use a cleaning agent that may contain oils.

    1. CLEAN AND ISOLATE THE TEETH - After prophylaxis, wash, dry and isolate the teeth (see 1a). A rubber dam provides the best isolation. Cotton rolls used in conjunction with an isolation shield are acceptable.
    2. ETCH ENAMEL - Apply Enamel Conditioner onto the tooth with syringe. Wait 30 seconds. Caution: Avoid contact with soft tissue or exposed dentin. If accidental spill occurs, wash immediately.
    3. RINSE - Wash the tooth and evacuate. Dry with oil free air or any commercial dental drying agent. Properly conditioned (etched) teeth should have a dull, chalky appearance. Highly mineralized teeth may require an additional two minute etch to achieve this effect.
    4. APPLY SEALANT - With a syringe tip, apply a thin layer over the dry, etched enamel. Apply enough material to fill the fissure without, however, interfering with the occlusion.
    5. LIGHT CURE - Cure with any commercial light for 20 seconds when used as a fissure sealer or for 10 seconds when used as a bonding agent. Important: Maintain a dry field at all times during application and curing.
    6. WIPE CLEAN - After the sealer sets, wipe the surface with a cotton pledget in order to remove the very thin film of uncured material remaining on the surface (the result of oxygen inhibition). Rinse and check the occlusion.

 

Helpful Hints

    1. The sealant's opacity permits easy detection of the sealer under any examination light.
    2. Re-examination every six months after application of Seal America is recommended. In order to reapply, polish the tooth with a sanding disc and apply sealer following the procedure described above.
    3. When sealing fissures, preferably work with one quadrant at a time.

 

Storage

Store at temperatures not exceeding 77°F (25°C). Avoid exposure to direct sunlight.

 

Etchant Precautions

Seal America Enamel Conditioner (etch) contains phosphoric acid. Protective eyewear is recommended for both dental staff and patients while using etchants. Contact with oral soft tissue, eyes, and skin should be avoided. If accidental contact occurs, flush immediately with copious amounts of water and consult a physician.

 

Sealant Precautions

A small percentage of the population is known to have an allergic response to acrylate resins. To reduce the risk of allergic reaction, minimize exposure to uncured resins. When resins are in prolonged contact with oral soft tissue, or in case of accidental prolonged exposure, flush with copious amounts of water. Wash skin with soap and water when skin contact occurs.

 

Caution

Federal law (U.S.A.) restricts this device to sale by or on the order of a dentist. 

 

   
    image    
   

Home | Contact Us | Site Guide | About Us
Contract Services | Laboratory Services | Manufacturing Services | Packaging Services | Warehousing Services | Regulatory Services | Design
Public Health | Fluoride Programs | Varnish America | Seal America

Find Us On Facebook
   
Contract Service Solutions